6 7
EU Declaration of conformity
We declare under our sole responsibility that this product corresponds to the directives 2014/35/EU,
2006/42/EC, 2014/30/EU and 2011/65/EU and conforms with the following standards or normative
documents:
EN 61010-1, EN 61010-2-051, EN 61326-1, EN 60529 and EN ISO 12100
�
A copy of the complete EU Declaration of Conformity can be requested at sales@ika�com�
!
Source language: German
Explication of warning symbols
/// Warning symbols
Indicates an (extremely) hazardous situation, which, if not avoided, will
result in death, serious injury�
Danger:
Indicates a hazardous situation, which, if not avoided,
can result in
death, serious injury�
Warning:
Indicates a potentially hazardous situation, which, if not avoided, can
result in injury�
Caution:
!
Indicates practices which, if not avoided, can result in equipment damage�
Notice:
/// General Symbols
Note
Indicates steps of actions that require particular attention�
Position number
Indicates device components relevant to actions�
A–––
Correct / result
Indicates the correct execution or the result of an action step�
Wrong
Indicates the incorrect execution of an action step�
Beep
Indicates steps that audible beeps can be heard�
Safety instructions
/// General information
›
Read the operating instructions completely before starting up and follow the safety
instructions.
› Keep the operating instructions in a place where it can be accessed by everyone�
› Ensure that only trained staff work with the device�
›
Follow the safety instructions, guidelines, occupational health, safety and accident prevention
regulations�
›
The device must only be used in a technically perfect condition�
/// Device setup
›
Set up the device in a spacious area on an even, stable, clean, non-slip, dry and fireproof surface�
› Ensure stable assembly� The vessel used for proceeding must be secured�
› Place the power supply outside the working area of the device�
› All screw connections must be properly tightened�
/// Work with the device
Danger!
› Do not use the device in explosive atmospheres, it is not EX-protected�
› With substances capable of forming an explosive mixture, appropriate safety measures must
be applied, e�g� working under a fume hood�
› To avoid body injury and property damage, observe the relevant safety and accident preven-
tion measures when processing hazardous materials�
Warning!
› The user should ensure that the substances under testing do not release poisonous, toxic or
flammable gases at the temperatures which they are subjected to during the testing�
!
Notice!
›
Covers or parts that can be removed from the device without tools must later be refitted to ensure
safe operation� This will prevent the infiltration of foreign objects, liquids and other contaminants�
› The device is not suitable for hand-held operation�
› Do not touch rotating parts during operation!
/// Accessories
› Protect the device and accessories from bumping and impacting�
› Check the device and accessories beforehand for damage each time when you use them� Do
not use damaged components�
› Safe operation is guaranteed only with the use of original IKA accessories�
To Next Page
Loading...
