8 9
lo-vi
me-vi / hi-vi I / hi-vi II
+
+
+
IK
A
Ro
ta
v
i
sc
l
o-vi
Gar
an
ty
AustraliaEurope
Switzerland
USA
China
UK
A
CBD
EGF
H
I
K
J
L
A ROTAVISC
B Extension arm
C Hexagon socket screw
D Temperature sensor clamp
E Screwdriver (AF = 4 mm) DIN ISO 2936
F Temperature sensor
Unpacking
› Please unpack the device carefully;
›
Any damage should be notified immediately to the shipping agent (post office, railway network
or logistics company)�
G USB cable
H User guide
I Warranty card
J Power supply unit
K Guard rail / Spindle set (ROTAVISC lo-vi)
L
Guard rail / Spindle set (ROTAVISC me-vi/
hi-vi)
/// Power supply / Switching off the device
› Disconnecting the device from the power outlet only works by removing the power supply
unit from the socket�
› The device must only be operated with the original power supply unit�
› The outlet for the power supply must be easily accessible�
Intended use
/// Disposal instructions
› The device, packaging, accessories and batteries must be disposed of in accordance with
national regulations�
/// Use:
›
The IKA ROTAVISC must be used in conjunction with the IKA ROTASTAND to calculate the vis-
cosity
of a fluid at the given temperature, spindle geometry and rotation speed� The viscosity
is a calculation of resistance against the fluid to flow�
› Intended use: Stand device
/// Area of use
›
Indoor environments similar to that a laboratory of research, teaching, trade or industry area�
›
The safety of the user cannot be guaranteed:
-
if the device is operated with accessories that are not supplied or recommended by the manufac-
turer,
-
if the device is operated improperly or contrary to the manufacture’s specifications,
- if the device or the printed circuit board are modified by third parties�
/// Maintenance
› The device must only be opened by trained specialists, even during repair� The device must
be unplugged from the power supply before opening� Live parts inside the device may still
be live for some time after unplugging from the power supply�
To Next Page
Loading...
