IKEA RENGORA User Manual (English)

Other manuals for IKEA RENGORA

Manual80 pages

User Manual24 pages

Owner's Manual48 pages

Questions and Answers:

J
Joy ThomasAug 29, 2025
Why IKEA RENGORA Dishwasher does not fill with water?
- N
  Nicole HaleAug 30, 2025
  If your IKEA Dishwasher isn't filling with water, several factors could be responsible. The water tap may be closed, so open it. The water pressure might be too low, in which case you should contact your local water authority. The water tap could be clogged or have limescale, so clean it. The filter in the water inlet hose may be clogged, so clean the filter. The water inlet hose might be kinked or bent, so ensure its correct position. Finally, the anti-flood device might be activated due to water leakages; if this is the case, close the water tap and contact the service.
O
oneillteresaAug 29, 2025
Why does the salt indicator stay on in my IKEA RENGORA?
- R
  robinsonchristopherAug 29, 2025
  The salt indicator in your IKEA Dishwasher might stay on after refilling the salt container if you're using salt that takes longer to dissolve. This does not negatively affect the appliance's performance. If the indicator remains on after 3 or 4 cycles, contact the service.
M
Marissa GrahamAug 28, 2025
How to prevent stains on dishes in IKEA Dishwasher?
- D
  dwyattAug 28, 2025
  If you're seeing stains and dry water drops on glasses and dishes after using your IKEA Dishwasher, it could be because: * The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position to increase the amount of rinse aid dispensed. * The quality of the detergent.
A
Alexandria OlsenAug 28, 2025
Why are there whitish streaks on dishes in my IKEA RENGORA?
- P
  powelljamesAug 28, 2025
  If you notice whitish streaks or bluish layers on your glasses and dishes after using your IKEA Dishwasher, it's likely due to: * An excessive amount of rinse aid being released. Try adjusting the rinse aid selector to a lower setting. * Too much detergent.
J
jacob85Aug 27, 2025
Why is my IKEA RENGORA not filling with water?
- D
  Donald ButlerAug 27, 2025
  If your IKEA Dishwasher isn't filling with water, consider these possible reasons: * The water tap might be closed. Ensure that you fully open the water tap. * The water pressure could be too low. In this case, it's best to contact your local water authority. * The water tap may be clogged or have limescale buildup. Try cleaning the water tap thoroughly. * The filter in the water inlet hose could be clogged. Clean the filter to ensure proper water flow. * The water inlet hose may have a kink or bend. Make sure the hose is correctly positioned without any obstructions. * The anti-flood device might be activated due to water leakages. Close the water tap and contact the service to resolve this issue.
J
jonestammyAug 27, 2025
How to fix poor washing results in IKEA RENGORA Dishwasher?
- M
  Manuel AlvarezAug 27, 2025
  For poor washing results with your IKEA Dishwasher, ensure you're using more intensive washing programs and that the spray arm jets and filter are clean. Also, confirm the spray arms are correctly positioned.
S
Susan BoyleAug 27, 2025
Why is my IKEA RENGORA Dishwasher not draining water?
- M
  Mathew McguireAug 27, 2025
  If your IKEA Dishwasher isn't draining, it might be due to a clogged sink spigot or kinks in the drain hose. Ensure that the sink spigot is clear and the drain hose is free from any bends or kinks.
E
Erik HopkinsAug 26, 2025
What to do if my IKEA Dishwasher does not drain water?
- A
  amyashleyAug 26, 2025
  If your IKEA Dishwasher isn't draining water, check to ensure that the sink spigot is not clogged and that the drain hose has no kinks or bends.
R
rodriguezraymondAug 25, 2025
How to fix IKEA RENGORA when the programme does not start?
- C
  charleshamiltonAug 26, 2025
  If the IKEA Dishwasher programme isn't starting, make sure the mains plug is properly connected to the socket. Also, ensure the appliance door is fully closed. Check the fuse in the fuse box and replace it if damaged. If a delay start is set, either cancel it or wait for the countdown to finish.
A
Ashley LeeAug 25, 2025
What to do if IKEA RENGORA Dishwasher programme does not start?
- C
  Charles TaylorAug 25, 2025
  If the IKEA Dishwasher programme doesn't start, possible causes include: the mains plug is not connected, so connect it; the appliance door is open, so close it; the fuse in the fuse box is damaged, so replace it; or the delay start is set, so cancel the delay start or wait for the countdown to end.