12
Programme buttons and additional functions Programmes
→"Overview of programmes", Page13
Additional functions
→"Additional functions", Page14
Start button
"Starting the programme" →Page22
button If you press for approx. 3 seconds, you can open
the basic settings.
→"Changing basic settings", Page24
Timer programming "Setting timer programming" →Page22
Door handle
1
Open the appliance door.
Display The display shows information about the remaining running
time or the basic settings. You can change the basic settings
via the display and the setting buttons.
→"Changing basic settings", Page24
1
Depending on the appliance specifications
Symbols on the display
1
The display shows the following symbols depending on the
model. See here for an explanation.
SYMBOL DESCRIPTION
If the symbol for machine care lights up
on the display, run machine care.
→"Machine Care ", Page24
If the rinse aid refill indicator lights up
on the display, top up with rinse aid.
→"Adding rinse aid", Page18
If the special salt refill indicator lights up
on the display, add special salt to the dis-
penser for special salt just before the
programme starts.
→"Adding special salt", Page18
When using for the first time, the symbol
lights up on the display and then goes
out again. The appliance has no WiFi
capability
1
.
If the water inflow or drainage malfunc-
tions, the symbol lights up or flashes on
the display.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
Depending on the appliance specifications