IKEA TORSBODA - Changing basic settings; Cleaning and servicing; Cleaning the tub; Cleaning products

24
BASIC SETTING DISPLAY TEXT SELECTION DESCRIPTION
Automatic door opening o02
1
o00 - o02 Activate or deactivate automatic opening of
the appliance door during the drying phase.
If the function has been activated, the run-
ning time may increase.
The following settings are possible:
● With the setting "o00" automatic door
opening is deactivated in all programmes.
● With the setting "o01" automatic door
opening is activated in all programmes.
● With the setting "o02" automatic door
opening is activated only in the Eco 50°C
programme.
→"Automatic door opening", Page9
Factory setting rE
Start with
YES
Confirm with
Restore changed settings to the factory set-
tings.
The settings for initial start-up must be con-
figured.
1
Factory setting (may vary according to model)
Changing basic settings
1. Open the appliance door.
2.
Press ⁠.
3.
To open the basic settings, press for 3
seconds.
a The display shows Hxx.
a The display shows ⁠.
4.
Press repeatedly until the display shows the
required setting.
5.
Press repeatedly until the display shows the right
value.
You can change several settings.
6.
To save the settings, press for 3 seconds.
7. Close the appliance door.
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working efficiently for a long time, it
is important to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
● Using detergents containing chlorine may result in harm
to health.
● Never use detergents containing chlorine.
1. Remove any coarse soiling in the interior with a damp
cloth.
2. Add detergent to the detergent dispenser.
3. Select the programme with the highest temperature.
4. "Start the programme without tableware." →Page22
Cleaning products
Only use suitable cleaning products to clean your appliance.
→"Safe use", Page8
Tips on appliance care
Follow the tips on appliance care to make sure your appli-
ance functions properly at all times.
ACTION BENEFIT
Wipe the door seals, the
front of the dishwasher and
the control panel regularly
using a damp cloth and
washing-up liquid.
This ensures the parts of the
appliance will remain clean
and hygienic.
If the appliance is not going
to be used for a while, leave
the door slightly ajar.
This will prevent unpleasant
odours.
Machine Care
Deposits, e.g. from remnants of food and limescale, can
cause your appliance to malfunction. To avoid such faults
and reduce odours, we recommend cleaning your appliance
at regular intervals.
Machine Care combined with machine care products and
machine cleaners is the right programme for the care of
your appliance.
Machine Care is a programme which removes various de-
posits in one washing cycle. Cleaning takes place in two
phases:
PHASE REMOVAL OF DETERGENT PLACEMENT
1 Grease and limescale Liquid machine care product or ma-
chine descaler in powder form.
Appliance interior, e.g. bottle hung
in the cutlery basket or powder in
the interior.