IKEA TORSBODA - Cleaning spray arms

26
4.
Press the locking catches together and lift the coarse
filter out ⁠.
1
2
5. Clean the filter elements under running water.
Carefully clean the rim of dirt between the coarse and the
fine filter.
6. Re-assemble the filter system.
Make sure that the locking catches on the coarse filter
click into position.
7. Insert the filter system into the appliance and turn the
coarse filter clockwise.
● Make sure that the arrow markings match up.
Cleaning spray arms
Limescale and soiling in the dishwashing water may block
the nozzles and bearings on the spray arms. Clean the spray
arms regularly.
1.
Unscrew the upper spray arm and pull down to re-
move ⁠.
1
2
2. Pull up the lower spray arm to remove.
3. Check the outlet nozzles on the spray arms for blockages
under running water and remove any foreign bodies.
4. Insert the lower spray arm.
a The spray arm clicks into position.
5. Insert the upper spray arm and screw it firmly in place.