IKEA TORSBODA - Running Machine Care; Filter system; Cleaning filters

25
PHASE REMOVAL OF DETERGENT PLACEMENT
2 Food remnants and deposits Machine cleaner Detergent dispenser
To ensure optimum cleaning performance, the programme
doses the detergents independently of each another during
the relevant cleaning phase. Correct placement of the deter-
gents is necessary here.
Run Machine Care without tableware if the indicator for Ma-
chine Care lights up on the control panel or if advised to do
so by the display. The indicator will go out after you have
run Machine Care. If your appliance does not have a re-
minder function, we recommend performing Machine Care
every 2months.
RunningMachine Care
Notes
● Run the Machine Care programme without any tableware
in the dishwasher.
● Only use machine care products and machine cleaners
specially designed for dishwashers.
● Make sure that there are no aluminium parts, e.g. ex-
tractor hood grease filters or aluminium pans, in the in-
terior of the appliance.
● If you have not run Machine Care after 3 washing cycles,
the indicator for Machine Care will go out automatically.
● For optimum cleaning performance, ensure the correct
placement of cleaners.
● Follow the safety instructions given on the packagings of
the machine care products and machine cleaners.
1. Remove any coarse soiling in the interior with a damp
cloth.
2. Clean the filters.
3. Place the machine care product in the appliance interior.
Only use machine care products specially designed for
dishwashers.
4. Pour the machine cleaner into the detergent dispenser
until it is filled completely.
Do not place any additional machine cleaner in the appli-
ance interior.
5.
Press ⁠.
6.
Press ⁠.
a Machine Care is run.
a Once the programme has ended, the indicator for Ma-
chine Care goes out.
Filter system
The filter system removes coarse soiling from the dishwash-
ing cycle.
1
2
3
1
Micro filter
2
Fine filter
3
Coarse filter
Cleaning filters
Soiling in the dishwashing water may block the filters.
1. After each wash check the filters for residue.
2.
Turn the coarse filter anticlockwise and remove the fil-
ter system ⁠.
● Check that no foreign objects fall into the sump.
1
2
3. Pull down the micro filter to remove.