Ilife V7s - Wet Mopping

Product Operating
Wet Mopping
(drawl)
(draw 2)
(draw 3)
(draw 4)
I.Dry clean is made with dust bin, and wet clean is made with water tank.
2.The mop bracket with mop should be on the robot when the water tank is used.(draw 1)
3. Pouring the clean water into the water tank (draw 2)
4.Open the robot lid and put the water tank into the body, the weep hole of the water tank
should be aligned with the weep hole on the robot body, (draw 3)
5.Close the robot lid, press "CLEAN" button to start the wet cleaning. There is no vacuum
suction function during the wet cleaning (draw 4)
6.When the robot vacuum cleaner is stopped with water tank inside, or when the wet
cleaning is completed, please takeout the water tank and pour out the water, then store
the water tank properly after the water tank is empty.
7.It is suggest to make the suction(dry clean) before wet mopping for a better cleaning
result
8.The water in the water tank is flow out automatically, so it is prohibited to let water tank
be still inside or outside of the robot when there is still water in the tank. This will cause the
water logging on floor.
9. Please take out the water tank when you charge the robot vacuum cleaner
9