Ilife V7s - Troubleshooting; Error code sheet

Trouble Shooting
Error code sheet
When the robot meets with some routine troubles, it will remind you by beep.
• Short tone
NO.
01
02
03
04
05
Tone
•
• •
• • •
• • • •
• • • • •
Cause
Wheels or side brushes
no work
Cliff sensor or bumper
sensor failure
Main body gets stuck
Turbo brush no work
Lack of Dust Bin
Solution
Check wheels or side
brushes
Clean cliff sensor and
check bumper sensor
Move main body and start
again
Check turbo brush
Check if the dust bin is put
inside the robot, Check if
the Filter is put inside the
dust bin.
Note: If all above solutions don't work, please take below actions.
1. Re-set the robot by re-turning on the power switch on the bottom side;
2. If re-set action doesn't work, please send the robot to seller for repairing.
12