INTRODUCTION AND SPECIFICATIONS
Installing the LDC-3700B
7/01 LDC-3700 Series 3
CHAPTER 1
Tilt-Foot Adjustment
The LDC−3700B Series Laser Diode Controller comes standard with folding front legs and two rear
feet for use as a bench top instrument. Extending the front feet so that the instrument front panel
sits up makes it easier to view the LED displays. To use them, place the unit on a stable base and
rotate the front legs downward until they lock into position.
Rack Mounting
The LDC 3700B Series Laser Diode Controller can be mounted in a standard 19−inch rack with the
optional rack mount kits. The kits contain a rack mount flange and hardware for mounting on either
side of the enclosure. All rack mount accessory kits contain detailed mounting instructions.
Operating the LDC-3700B Laser Diode Controller
Now that the LDC−3700B Laser Diode Controller is installed and ready for use, you can begin to
learn about its operation. The following figures are front and rear photographic copies showing the
functional keypad groupings, rear panel connectors, and so on. Use these figures to familiarize
yourself with the LDC−3700B Controller. After that, use Chapter 2 for fundamentals of operating the
controller.
Figure 1.1 LDC 3700B Series Controller Front View
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
