ILX Lightwave LDC-3700B Series - IEEE488.2 Common Commands; Figure 3.4 Common Command Diagrams

REMOTE OPERATION
Command Syntax
7/01 LDC-3700 Series 45
CHAPTER 3

IEEE488.2 Common Commands
The IEEE488.2 Common Commands and Queries are distinguished by the "*" which begins each
mnemonic. The diagrams below show the syntax structure for common commands, common
command queries, and common commands with numeric data required.
Figure 3.4 Common Command Diagrams
Numeric data is required with *PSC (1 = on, 0 = off), *RCL (0 to 10, see front panel RECALL
function), *SAV (1 to 10, see front panel SAVE function), *ESE (0 to 255, see Figure 3.2), *SRE (0 to
255, see Figure 3.2), and *PUD (used at factory only).
A list of all of the IEEE 488.2 Common Commands supported by the LDC−3700B:
See the Command Reference on page 59 for descriptions of all the commands, including common
commands, supported by the LDC−37x4B.
*CAL? *CLS *ESE
*ESE? *ESR? *IDN?
*OPC *OPC? *PSC
*PSC? *PUD *PUD?
*RCL *RST *SAV
*SRE? *SRE *STB?
*TST? *WAI
:
*
COM MAND
<white
space>
<Decimal
Numeric Program
Data>
Common Command with Numeric Data
:
*
COMMA ND
?
Common Command Query
:
*
COMMAND
Common Command
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com