ILX Lightwave LDC-3700B Series - Figure 3.7 TEC Output off Register

REMOTE OPERATION
Command Syntax
50 LDC-3700 Series
CHAPTER 3

Bit Reference
Figure 3.7 TEC Output Off Register
Bit Reference
0− LASER Current Limit 8− N/A
1− LASER Voltage Limit 9− LASER Output Changed to be out of Tolerance
2− N/A 10− TEC Output is Off Event
3− LASER Power Limit (output on) 11− TEC High Temperature Limit Condition
4− N/A 12− N/A
5− N/A 13− N/A
6− N/A 14− N/A
7− N/A 15− N/A
0− TEC Current Limit 8− Sensor Type Change (while output on) Eve.
1− TEC Voltage Limit 9− Outside of TEC Tolerance Cond.
2− N/A 10− Sensor Shorted (while output on) Cond.
3− High Temperature Limit 11− N/A
4− N/A 12− N/A
5− Booster Changed (while output on) Eve. 13− N/A
6− Sensor Open (while output on) Cond. 14− N/A
7− TEC Module Open (output on) Cond. 15− N/A
765432 10
76
54
3
2
10
15
14
13 12
11 10
8
9
101112131415
9
8
Logical
OR
Turn Output Off
TEC Output Off
Register
TEC Output Off
Enable Register
TEC:ENABle:OUTOFF <nrf>
TEC:ENABle:OUTOFF?
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com