Image Access widetek 44 User Manual

/ /
Page 62 Manual
C.2.7 Zonal OCR
The scanner offers a zonal OCR function.
Zonal OCR means, that only the marked area will be processed by the OCR function. Text
and line feed will be found only. A layout analysis will not be executed.
Prior using the zonal OCR it is required to set the scan parameters as follows:
File Format: PDF (see chapter C.2.5.8)
Job Mode: Active (see chapter C.2.6)
File Type: MultiPDF (recommended) or Single Files (see chapter C.2.5.10
Touch the button in order to scan the document
To see a preview of the scanned image, touch one of the buttons Size, Quality,
Enhancement or Transfer to switch to the preview touchscreen.
Touch here to
define an area to be examined by the OCR function.
The symbol gets a red dotted border.
Touch in the preview image and open a frame around the area which should examined by
the OCR function.
Start pulling the frame with the upper left corner and pull the frame to the lower right
corner.
Picture 53: Area defined for OCR
A small window opens in the preview area.
Select OCR Text to start the OCR process.

Image Access widetek 44 Specifications

General

Brand	Image Access
Model	widetek 44
Category	Scanner
Language	English