Image DE100 - SETTING THE CONTROLLER

OPERATING AND PROGRAMMING INSTRUCTIONS
4-4
H1
171
171-180
I1
181
181-190
J1
191
191-200
K1
201
201-210
L1
211
211-220
m1
221
221-230
n1
231
231-240
O1
241
241-250
P1
251
251-260
q1
261
261-270
r1
271
271-280
S1
281
281-290
t1
291
291-300
u1
301
301-310
V1
311
311-320
W1
321
321-330
X1
331
331-340
Y1
341
341-350
Z1
351
351-360
3.2 Temperature Setting (Press the "Up" or "Down" to select temperature.)
- Setting Low Heat can be set to any value from 35 - 65 ° C (factory setting
value is 65 ° C).
- Setting Medium Heat can be set to any value from 66 - 82 ° C (the factory
setting is 82 ° C).
- Setting High Heat can be set to any value from 83 - 93 ° C (factory setting
value is 90 ° C).
3.3 Humidity Sensor Setting (Optional)
- The humidity can be set from 0 - 35%.
- In case disable, set at 0.
The configuration of the controller is as follows.
- Press Up, Down, and then the program will ask for a password (password is 9999)
to the C0 – C10, then press the Enter button to settings the controller.
D. SETTING THE CONTROLLER