MAXIMUM CIRCUIT POWER CHART
Battery
Type
SPECIFICATION
200mA/cell
1~6cells
1~18cells
2V~24V
607g
150x116.5x53mm
Operating voltage range
Circuit power
Charge current range
Discharge current range
Current drain for balancing Li-Po/Ion/Fe
Li-ion/Fe/Polymer cell count
NiCd/NiMH battery cell count
Pb battery voltage
Net weight
Dimension
DC 11.0~18.0 Volt
Max. Charge power 200Watts
Max. Discharge power 25Watts
0.1~10.0A
0.1~5.0A
This charger is designed and approved exclusively for use with the types of battery stated in these
Instruction Manual. SkyRC accepts no liability of any kind if the charger is used for any purpose other
than that stated.
We are unable to ensure that you follow the instructions supplied with the charger, and we have no
control over the methods you employ for using, operating and maintaining the device. For this reason
we are obliged to deny all liability for loss, damage or costs which are incurred due to the incompetent
or incorrect use and operation of our products, or which are connected with such operation in any way.
Unless otherwise prescribed by law, our obligation to pay compensation, regardless of the legal
argument employed, is limited to the invoice value of those SkyRC products which were immediately
and directly involved in the event in which the damage occurred.
Liability exclusion
39 40
To Next Page
Loading...
