3.17 COMBUSTION PARAMETERS.
Supply pressure
kPa
1,0
2,8
rate at
nominal
heat output
CO
at Nom Q./Min.
%
7,75 / 3,30 8,90 / 3,75
CO with 0% O
2
at Nom Q /Min.
ppm
55 / 11 78 / 29
NO
with 0% O
at Nom Q /Min.
Flue temperature at nominal output
°C
67
68
Flue temperature at minimum output
3.18 TECHNICAL DATA.
Heat output NG MJ/h (kW) 126 (34,9)
CH
minimum
heat output MJ/h (Kw) 53.9 (14.9)
Burner pressure maximum NG/LPG
Burner pressure minimum NG/LPG
Heat input LPG MJ/h (kW) 124.2 (36.2)
Heat output LPG MJ/h (kW) 130 (34.9)
Heat loss at casing with burner On/
Heat loss at flue with burner On/O
Central heating circuit max. operating pressure
Central heating circuit max. operating temperature
Adjustable central heating temperature
°C
35 -
85
System expansion vessel total volume
l
5,1
Expansion vessel factory-set pressure
Pressure relief setting bar (psi) 3 (44)
Expansion vessel capacity
L
10
Water content in generator
Head available with 1000 l/h ow rate
Internal pump head
(kPa)
Hot water production heat output
o
Domestic hot water circuit max. working pressure
Min. pressure (dynamic) domestic hot water circuit
Weight of empty boiler
kg
45
Pump consumption
W
95
Fan power consumption
W
65
Equipment electrical system protection
-
IPX5D
Weighted NO
mg/kWh
110
Weighted CO mg/kWh
81
C12 /C32 / C42 / C52 / B22 / B32
- Flue temperature values refer to an air inlet
temperature
of 15°C.
approved with the HE 30 COMBI INTERNAL,
components 60/100 and 80/125 mm.
- The max. sound level emitted during boiler
operation is < 55dBA. The sound level value is
referred to semianechoic chamber tests with
boiler operating at max. heat output, with
extension of flue gas exhaust system according
to product standards.
-
25