IMO iDrive2 XKL - Page 9

iDrive2 inverters Product overview
9
Function
Specification
resolution
Terminal analog input
resolution
≤ 20mV
Analog input
1 input 0~10V/0~20mA
Analog output
1 input 0~10V/0~20mA
Digital input
5 common input
Digital output
1 Y output (commonly used with digital output) and 1
programmable relay output
Communication
485 communication
Frequency setting
Digital setting, analog setting, multi-step speed setting, PID
setting, MODBUS communication setting and so on
Switch between different settings
Automatic voltage
adjustment
Keeps output voltage stable when the grid voltage changes
Fault protection
More than 10 fault protections
Others
Mountable method
Wall mountable
Temperature of the running
environment
-10~50℃, derate above 40℃
Cooling
Single/three-phase 230V 0.2-0.75kW natural cooling
Single/three-phase 230V 1.5-2.2kW, three-phase 380V
0.75-2.2kW
Enclosure
IP20
Braking unit
Embedded
DC reactor
Not optional
Braking resistor
Optional and external
Optional EMC filters
C2 or C3 filter options