To Next PageTo Next Page
Need help?Do you have a question about the IMPPUMPS NMT MAX Series and is the answer not in the manual?
General| Protection class | IP44 |
|---|---|
| Insulation class | F |
| Maximum operating pressure | 10 bar |
| Operating Modes | Automatic |
| Voltage | 230V |
| Frequency | 50 Hz |
| Phase | Single phase |
| Outlet Size | 1 inch |
| Inlet Size | 1 inch |
| Material | Stainless steel |
Describes the purpose and applications of the NMT circulating pumps.
Explains the meaning of codes and identifiers on the pump's label.
Details procedures for pump care, obtaining parts, and disposal.
Provides essential guidelines for safe installation, use, and maintenance.
Lists the standards and protection classes the pumps comply with.
Specifies the types of liquids suitable for the pump and those to avoid.
Defines the permitted operating ranges for temperature and humidity.
Details voltage, power, current ratings, and startup configurations.
Outlines communication interfaces and protocols like Ethernet and Modbus.
Guides on correctly fitting the pump into the piping system.
Instructions for safely connecting the pump to the electrical supply.
Details on connecting communication modules and interfaces.
Explains how to control the pump via panel, switch, or external signals.
Describes the functions of the display panel and its keys.
Details the operations associated with short and long presses of the control keys.
Procedures for powering the pump on and off via the display.
How to select and set different operating modes and parameters.
How to lock and unlock the pump's current settings and operation.
Explains the functionality of the 10-step rotary switch for mode selection.
Details the configuration of analog inputs and outputs for pump control.
Describes the function and configuration of the relay output for status indication.
Information on connecting the pump via Ethernet and accessing its web server.
Details on using Modbus for pump information access and control.
Procedure for restoring the pump and communication module to default settings.
Explanation of the different operating modes available for the pump.
Describes operational modes for twin pump configurations.
Explains how errors are marked and identified on the pump display.
Lists common error codes, their causes, and recommended solutions.
General guidance for diagnosing and resolving pump operational issues.
Details the manufacturer's guarantees regarding product quality and repair.
Lists conditions under which the warranty is not valid.
Outlines the terms and conditions for claiming warranty service.
