IMT Analytics PF-300 - 3 Safety Instructions; Hazard Representation and Personnel

7
Safety instructions
3
IMT Analytics AG
This User Manual uses the representation below to specifically draw attention to
residual risksduring intended use andemphasise important technical requirements.
Information and/or instructions and prohibitions to prevent damage of
any kind.
Work on and with FlowAnalysermay only be performed by persons
whohave undergone appropriate technical training andhave the
necessary experience.
Themanufacturer accepts no responsibilityor guarantee and willexempt itself fromli-
ability claims accordinglyif theoperatoror any third parties:
• fail to use the device in accordance with its intended use
• disregard the specifications
• tamper with the device in any way (conversions, modifications, etc.)
• operate the device with accessories that are not listed in theassociatedsets
of product documentation.
Although the devicemeets high quality and safety standards andit
has beenconstructed and tested according to the current state
of the art,it is not possible to rule outthe risk of injuries withseri-
ousconsequencesif the device is usedinnon-compliance with the
intended use (improperly) or is misused.
Therefore please read through this User Manual carefully and keep
this documentation in a readily accessible place close to your device.
Themaximum service life of the devicehas been specified as 10(ten)years,provided
it is handled properly in accordance with this User Manual.
3.1 Representation of hazards,
cautions and notes
3 Safety instructions
3.2 Personnel
3.3 Responsibility and guarantee
3.4 Service life