IN-COMMAND JRVCS2 User Manual

JRVCS2
21
2.4 On the DC, a request message will appear. Press “Pair”
to start the BT pairing and concurrently enter the same
passkey on the Mobile device.
2.5 The DC now shows the Mobile device is paired.
3. Apple Mobile Device Pairing Steps:
3.1 Enable “Bluetooth” in the system settings of Apple mobile device.
3.2 Press Scan on the DC Bluetooth page. Locate the Apple device
in the Unpaired Device list. Select the Apple device by pressing it.

IN-COMMAND JRVCS2 Specifications

General

Brand	IN-COMMAND
Model	JRVCS2
Category	Control Systems
Language	English