STEP 3 : Connecting the Vest to the PTU
NOTE: The interconnecting hoses are interchangeable and can be flipped. You
do not need to worry about which end of the hose is attached to the PTU or
the vest.
1. Grasp the sides of the locking
hose connecter and push onto the
device (Image A). Blue lever on
hose connector will automatically
flip up (Image B).
2. Continue to push the hose
connector firmly against device
until hose connector has been
properly fitted against device
(lever will flip down).
3. Verify the blue lever is securely
latched by pressing down firmly.
(Image C).
NOTE: Do not force blue lever
to close. If you feel resistance,
push the hose connector more
firmly against device.
4. Grasp the sides of the locking
hose connecter and push onto
the vest port as show (Image D).
Blue lever on hose connector will
automatically flip up.
5. Continue to push the hose
connector firmly against the vest
port until hose connector has been
properly fitted (lever will flip down).
6. Verify the blue lever is securely
latched by pressing down firmly.
(Image E).
NOTE: To disconnect the vest, lift
the lever and pull hose off the
vest port.
AB C
ED
SYSTEM SETUP (cont’d)
11
inCourage
®
Airway Clearance Therapy | INSTRUCTION MANUAL
To Next Page
Loading...