Treatment Definitions:
1. FREQUENCY (F) – Represents the number of air pulses that are delivered over
a period of time. [The inCourage System represents frequency in Hertz (Hz), or
the number of pulses per second.]
2. PRESSURE (P) – Represents the force that the system places against your body.
[The inCourage System represents pressure as a percentage (%) of the
maximum pressure created.]
3. SESSION – A full treatment of individual or combined steps.
4. STEP – A segment of frequency, pressure, and time that together with other steps
make up a complete session.
5. RAMPING – During a step, the inCourage System gradually increases or
decreases the frequency to the next step’s frequency.
6. AUTO PAUSE – Automatically pauses session every 5 minutes. Press RUN to resume.
7. HOUR METER READING (HMR) – Represents the total use time over the life of
the device. This timer cannot be reset.
8. USE INFO – Represents the average session length in minutes and average
pressure setting for the previous number of sessions displayed. Only sessions
over five minutes will be counted. The user can reset this information.
9. PAUSE TIME – Allows for automatic continuation of therapy after a pre-
programmed pause during an Auto Pause or Multi Step session.
10. PRESSURE LIMIT – The maximum allowable pressure setting for all therapy
sessions and programming.
11. PRESSURE INCREMENT – The amount of pressure percent (%) changed
when increasing or decreasing pressure.
12. FAST SET PROGRAMMING (FS) – A method for creating a customized Multi
Step session of up to 12 steps with alternating frequency with an input of 6
settings: Number of Steps, Low Frequency, High Frequency, Pressure Setting,
Total Program Time, and Auto Pausing On or Off.
CAUTION: Use of the system other than as prescribed could result in
ineffective treatment. Prescribed settings must be utilized!
TREATMENT DEFINITIONS
12
inCourage
®
Airway Clearance Therapy | INSTRUCTION MANUAL
To Next Page
Loading...