CM010 - Checking the inspection and maintenance schedules/logs
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must be carried out only by authorized personnel of the
manufacturer!
Orientation
Before starting any maintenance activities, the customer’s documentation
(inspection and maintenance schedules / logs) must be checked for any
maintenance activities performed. Any inspection and maintenance schedules/logs
are used for problem tracking and are important for documentation and
implementation of warranty claims.
Requirement
Compliance with and implementation of the inspection and
maintenance schedules/logs increases process capability and the life
of the INDEX turning and machining center.
Procedure
1.
Caution
Machine that has not been maintained and serviced.
Shorter life of the machine, lower process capability.
Failure to comply with the inspection and maintenance
schedules/logs.
Reduced process capability and availability of the
machine
Check compliance with the inspection and maintenance
schedules, and customer documentation regarding performed
maintenance activities (inspection and maintenance schedules/
logs)
Have inspection and maintenance schedules/logs been created and have the
maintenance steps mentioned been carried out.
Maintenance Summary - 2.000 Operating hours
51
Maintenance Instructions
MS40-8
DIM078EN - 02.06.2020
To Next Page
Loading...
