IDS 410/422 User's Manual
32
Parameter 28: TX2 Format (2 Condec data format)
If parameter 27 is set to 0 (continuous tx), parameter 28 determines what is sent:
1-AND: <status>,<mode>,<polarity><weight><units><terminate>
status: OL (overload), ST (stable), US (unstable, in motion)
mode: GS (gross mode), NT (net mode)
polarity: + (positive weight), - (negative weight)
weight: 7 characters data, NOT zero blanked, with decimal point
units: lb, kg, t (ton), tn (tonne), g<sp> (gram), oz
terminate: lf, cr (line feed, carriage return)
2 - CONDEC
: <stx><polarity><weight><units><mode>>status><terminate>
polarity: space (positive weight), - (negative weight)
weight: 7 characters, zero blanked, with decimal point
units: L (lb), K (kg), T (ton), G (gram), O (oz)
mode: G (gross mode), N (net mode)
status: <space> (valid weight), M (motion), O (over wt), I (invalid)
terminate: lf, cr (line feed, carriage return)
3 - WEIGHTRONIX
: <mode1><mode2><polarity><weight><space><units><term>
mode1: space (gross mode), 0 (zero if net mode)
mode2: G (gross mode), N (net mode)
polarity: + (positive weight), - (negative weight)
weight: 6 characters, NOT zero blanked, with decimal point
units: lb, kg, oz, g <space>(gram), t<space> (ton), tn (tonne)
terminate: lf, cr (line feed, carriage return)
4 - OHAS:
<polarity
><weight><space
><units><2 spaces><mode><status><term>
polarity: space (positive weight), - (negative weight)
weight: 7 digits, zero blanked, with decimal point
units: lb, kg, oz, g <space>(gram), t<space> (ton), tn (tonne)
mode: G (gross mode), N (net mode)
status: <space> (valid weight), M (motion), O (over wt), I (invalid)
terminate: lf, cr (line feed, carriage return)
5 - Label 85: Use parameter 85 (print label 85).
Print label 85: transmits the contents of parameter 85 (print label 85)
Data entered into a print label can include register data:
[253] [reg no] buffer register data, minimum size (zero blanked no spaces)
[254] [reg no] buffer data, 7 character field, zero blanked, right justified.
To Next Page
Loading...
