EasyManua.ls Logo

Infasecure CS4513 - ISOFIX Compatible Restraint; ISOFIX Lower Anchorages

Infasecure CS4513
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
ISOFIX Compatible Restraint
Child Car Seat
ISOFIX lower anchorages
Newer vehicles have one or more seating positions
with ISOFIX anchorages. If the vehicle is equipped
with ISOFIX anchorage, the lower anchor points may
be visible at the vehicle seat bight . If not visible, they
may be marked with this symbol.
See your vehicle owner’s manual for exact locations,
anchor identication, and requirements for use with a
child restraint.
Check vehicle owner’s manual for vehicle top tether
anchor locations. They may be identied using one of
the anchor symbols as shown.
This restraint uses Flexible Lower Anchorage
Connector Straps. Flexible connectors: A pair of
exible straps with connectors are located at the
base of the child restraint which connect to the
vehicle's ISOFIX low anchorages. The exible
connectors are then adjusted to secure the child
restraint rmly to the vehicle. The top tether strap
must be anchored to the vehicle. The vehicle seatbelt
will not be required when the exible connectors are
being used.
ISOFIX low anchorages are built in to the vehicle at
the time of manufacture, if the vehicle manufacturer
chooses to provide them. The number of ISOFIX low
anchorages will depend on the design of the vehicle.
Generally, ISOFIX low anchorages are located on the
two outer seating positions in the second row, and
not in the middle seating position.
If you wish to use the middle seating position in the
second row, you may still t an ISOFIX compatible
child restraint in the middle position by using the
vehicle seatbelt and top tether strap.
IMPORTANT
!
ONLY use exible LAC straps on the child
restraint in a seating position recommended
by vehicle manufacturer.
Seat Belt
Buckle

Related product manuals