PC
USB cable
J4
USB
connector
U1
PSoC™ 5LP
KitProg3
U3
PSoC™ 4 HV PA
(DUT)
12V Wall
Adapter
SW5
Power
Switch
D12
VBAT
LED
J22
Power
Connector
Figure 15 USB cable connection
10. Select Project> Options… to change the debugger settings.
Figure 16 Debugger options
11. Select Debugger from Options and change the Driver to CMSIS DAP as shown in Figure 17.
Getting started with PSoC
™
HV PA family
3 Development environment and tools
Application note 26 002-30264 Rev. *B
2023-04-19
To Next Page
Loading...
