Infineon TRAVEO T2G - Debugging with Single Core CM4 Workspace

User Guide 14 of 25 002-32910 Rev. *A
2021-09-29
Getting started with TRAVEO™ T2G entry family starter kit
Download and debug with starter kit
3.2 Debugging with single core CM4 workspace
1. Start IAR EWARM and open the SDL template workspace file:
tviibe1m\tools\iar\flash\tviibe1m_flash_cm4_mc_template
Figure 15 Selecting CM4 single core template
2. Select the workspace revision starter_kit from the drop-down list under Workspace, as shown in Figure
16.