Infineon TRAVEO T2G - Debugging with Dual Core CM0+ and CM4 Workspaces

User Guide 18 of 25 002-32910 Rev. *A
2021-09-29
Getting started with TRAVEO™ T2G entry family starter kit
Download and debug with starter kit
3.3 Debugging with dual core CM0+ and CM4 workspaces
1. Start IAR EWARM and open the SDL template workspace file:
tviibe1m\tools\iar\flash\tviibe1m_flash_cm0plus_cm4 _template
Figure 22 Selecting CM0+ and CM4 dual core template