Infineon XENSIV TLI4971 - Page 30

Application Note 30 of 31 Rev. 1.30
2022-03-01
Current Sensor TLI4971
Programming Guide and User Manual
Revision history
Document
version
Date of release
Description of changes
Rev. 1.30
2022-03-01
Updated typo in note (table 1)
Updated register address (table 5)
Added position of Diagnosis_mode_enable_bit in chapter 7
Combine table 12..14 into Table 9..11 and renumber all later tables
Delete chapter 8 (OCD-Settings Overview)
Added chapter 4.3 (Margin test)
Shorten chapter 5 and remove table 16
Editorial changes
Changed to revision V1.3
Rev. 1.20
2021-03-01
Updated “Enter Interface Sequence”
Updated OCD-settings
Updated programming voltage
Editorial changes
Rev. 1.10
2020-03-01
Change OCD setting
Updated OCD example
Rev. 1.00
2019-12-20
Initial version