4. Current zoom in ratio (such as 2.8╳)
5. Calibration Mode (in automatic shutter calibration mode (A), while 5 seconds before calibration,
there will be an icon of countdown replaced letter ‘A’ right behind the icon of calibration, as )
6. Compass (will not reveal when this function switched OFF)
7. Standby setting (default OFF)
8. Video output status (icon will not reveal while video output OFF)
9. Wi-Fi Status ( ：Wi-Fi OFF； ：Wi-Fi ON and Connected)
10. Clock (set clock in the App “InfiRay Outdoor”)
Battery status（When the icon is in green color, as , indicates its capacity is more than 40%; when the
icon is in yellow color, as , indicates its capacity is less than 40%; when the icon is in red color, as ,
indicates its capacity is low, please charge instantly; when there is a flash icon in the icon, as ,
indicates it is charging; when using external power supply, the icon reveals as ）;
14. Shortcut Menu
For setting commonly used modes easier, shortcut menu includes: image mode, screen brightness,
image sharpness and zeroing range.
➢ Press M button in Main Menu to enter Shortcut Menu;
➢ Press ↑button and ↓button to switch options in following modes;
⚫ Image Mode: press M button to switch image modes in loop, as White Hot, Black Hot, Red
Hot, Pseudo Color and Target Highlighting;
⚫ Screen Brightness: Press M button to change brightness, level 1 – 5;
⚫ Image Sharpness: Press M button to change sharpness, level 1 – 5;
⚫ Zeroing range: Press M button to switch zeroing range info in current zeroing mode (if
select Rifle A, in this mode, you can only switch saved range values of Rifle A)
➢ Hold down M button to save and exit to Main Menu.
Tips: in shortcut menu, scope will automatically save and exit to Main Menu while idled 5 seconds.
To Next Page
Loading...
Need help?
General
