InFocus in3138hd - Advanced 1 Features

IN3138HD User’s Manual
Advanced 1 Features
Press the Menu button to open the OSD menu. Press the ◄► buttons to move to the Settings 2
menu. Press the ▲▼ buttons to move to the Advanced 1 menu and then press
(Enter) or ►.
Press the ▲▼ buttons to move up and down in the Advanced 1 menu. Press the ◄► buttons to
enter and change setting values.
ITEM DESCRIPTION
Menu Position Press the ◄► buttons to enter and select different OSD location.
Translucent Menu Press the ◄► buttons to enter and select OSD background translucent level.
Low Power Mode Press the ◄► buttons to enter and turn Low Power Mode on or off.
Fan Speed
Press the ◄► buttons to enter and toggle between Normal and High fan speeds.
Note: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
Lamp Hour Reset
After replacing the lamp, this item should be reset. See page 31 for more information
on Lamp Hour Reset.
Projector ID
Press the ◄► buttons to enter and adjust the two digit projector ID from 00 through
98.
Network
Press
(Enter) or ► to enter the Network menu. See page 31 for more information
on Network.
–30 –