28
Optimizing computer images
After the projector is running and the image is on the screen, you can optimize the
image using the onscreen menus. For general information on using the menus, see
page 30.
• Select default image settings using a preset appropriate to your environment.
• Adjust the Keystone, Contrast, or Brightness in the Basic Picture menu
(
page 31).
• Change the Aspect Ratio. Choose the option that best fits your input source
(
page 31).
• Adjust the Color Temperature in the Advanced Picture menu (page 31).
• Adjust the Phase, Tracking, or Horizontal or Vertical position in the Advanced
Picture menu (
page 32).
• Once you have optimized the image for a particular source, you can save the
settings using Presets. This allows you to quickly recall these settings later
(
page 31).
Presentation features
Several features are provided to make giving presentations easier. Here is an
overview, details are found in the menu section.
• The Custom key allows you to assign various features to the button. The
default effect is Source Info, which displays information about the projector
and current source. See
page 33 for details.
• The Search Screen option lets you change the appearance of the blank screen
and start up screen (
page 34).
• Two options, Auto Off and Screen Save Time, are provided to automatically
shut down the projector after several minutes of inactivity or display a black
screen. This helps preserve lamp life (page 33).
To Next Page
Loading...
Need help?
General
