32
Advanced Picture menu
BrilliantColor™: produces an expanded on-screen color spectrum that delivers
enhanced color saturation for bright, true-to-life images. Choose Normal Look for
most video sources and Bright Look for most computer sources.
White Peaking: increases the brightness of whites that are near 100%.
Color Temperature:
changes the intensity of the colors. Select a listed relative
warmth value.
Force wide: when this is of
f, the analog locking algorithms choose the standard
mode resolution (4:3) as the preferred default resolution. When this is on, the
analog locking algorithms choose wide mode resolution (16:10) as the preferred
default resolution.
Overscan: removes noise
around the video image.
Phase: adjusts the horizontal phase of a computer source.
Sync Threshold: (progressive signals
only) If a hardware device, such as a DVD
player, is not syncing properly with the projector, select this option to help it to sync
when connected to the projector.
Tracking: adjusts the vertical scan of a computer source.
Color Space: applies to compu
ter and component video sources. It allows you to
select a color space that has been specifically tuned for the input signal. When Auto
is selected, the projector automatically determines the standard. To choose a
different setting, turn off Auto, then choose RGB for computer sources or choose
either REC709 or REC601 for component video sources.
Noise Reduction: redu
ces temporal and/or spatial noise in the image.
Set Black Level...: a
nalyzes the current input image and calculates an offset value
which is then added to the analog to digital converter black level value. This
ensures optimum black level for each analog source.
Detect Film: det
ermines whether the original source of the input video was film
(progressive) or video (interlaced).
3D Control: allows you
to enjoy 3D (stereoscopic) content. Your IN3914 supports
two synchronization modes (External Sync and DLP Link™) for controlling LCD
shutter glasses. In addition to the projector, you will need a pair of 3D shutter
glasses, 3D content, and 3D compatible source (and emitter). Ensure the glasses
you choose are consistent with the synchronization mode you will be using.
3D Sync Invert: (Only applies when 3D
control is set to DLP Link™.) If the image
appears to flutter, look odd or if the image depth looks off or you experience eye
strain, turn this feature on to see if the image improves.
Gamma: select the appropriate gamma from among Video, Film, Bright, and CRT.
Red/Green/Blue Gain:
adjusts the gain of the red, green or blue channel of the
image.
Red/Green/Blue Offset:
adjusts the offset of the red, green or blue channel of the
image.
Horizontal/Vertical Position:
adjusts the position of a computer source.
To Next Page
Loading...
Need help?
General
