7
Connecting a computer source
USB connection
If you have a Windows or Macintosh computer, connect a USB cable between your
computer's USB port and the projector's USB mini B connector.
To advance slides in a PowerPoint presen
tation using the remote control, plug a
USB cable into the USB mouse connector on your computer and the USB mini B
connector on the projector.
VGA connection
Connect one end of the provided computer cable to the VGA 1/VGA 2 connector
on the projector and the other to the VGA connector on your computer. If you are
using a desktop computer, you will need to disconnect the monitor cable from the
computer’s video port first.
Connecting power
Connect the black power cord to the Power connector on the rear of the projector
and to your electrical outlet. The Power light on the Status Indicator Panel (page 16)
turns amber.
NOTE: Always use
the power cord that shipped with the projector.
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable, not
included) to your computer and to the Audio 1 connector on the projector. You may
also need an adapter.
To Next Page
Loading...
Need help?
General
