InFocus IN5533 - Page 18

17
Problem Solution Result
No computer image, just the words “Signal out of
ran
ge.”
B
Signal out of
the range
Press the Auto Image button on the keypad or remote. To
adjust computer refresh rate, go to Control Panel > Display
> Settings > Advanced > Adapter (location varies by
operating system).
You may also need to set a different resolution on your
computer, as shown in the following problem, “image fuzzy
or cropped.”
Computer image projected.
Only my laptop’s background appears, not the
Desktop icons.
B
DisplayLink - Use DisplayLink software to change the
display mode from Extended Desktop to Duplicated
Desktop.
Windows - Disable “Extend my Windows Desktop” in
Cont
rol Panel > Display > Settings > Display 2 (location
varies by operating system).
Uncheck this
option, then
click Apply
Background and Desktop projected.
B