What to do if InFocus Projector has no start up screen?
If your InFocus projector shows no start-up screen, plug the power cord into the projector, turn on the power switch, and press the power button.
Why projected colors don't match source on InFocus IN5555L Projector?
If the projected colors on your InFocus projector don’t match the source, adjust the color, tint, brightness, and contrast in the Picture menu, and/or adjust the color space in the Input menu.
How to make image square on InFocus IN5555L?
To ensure the image is square on your InFocus projector, adjust the angle of the projector so that it is square with the screen.
How to correct reversed image on InFocus IN5555L Projector?
If the image is reversed left to right on your InFocus projector, turn the Projection Mode to Front in the Alignment menu.
Why video in PowerPoint presentation does not play on InFocus IN5555L Projector?
If a video embedded in your PowerPoint presentation does not play on the screen of your InFocus projector, turn off the internal LCD display on your laptop.
What does it mean if Status LED turns on again on InFocus IN5555L?
Turn the InFocus projector off and wait one minute, then turn the projector on again. If the Status LED turns on again, service is required.
Covers safe operation, placement, power connection, and handling of the projector.
Details requirements for professional installation, servicing, and using approved parts/lamps.
Discusses hazards of mercury lamps, rupture risks, cooling, and proper disposal.
Details various video, audio, and control connection ports available on the projector.
Covers screen distance, power/device proximity, and clearance from walls for optimal placement.
Explains vertical/horizontal image offset ranges and factors affecting projected image size.
Guides on projector distance, angle, zoom, focus, and height adjustments for image clarity.
Provides a solution for the lamp not turning on when the Temp LED is illuminated.
Explains that lamps may require replacement when LEDs indicate a problem.
Covers battery installation, safety precautions, and optimal operating range for the remote.
Details the purpose and operation of each button on the remote control.
Explains how to access, navigate, and adjust settings within the projector's menu system.
Details settings for picture mode, contrast, brightness, saturation, hue, and sharpness.
Provides instructions and warnings for safely cleaning the projector lens using a soft cloth.
Lists critical safety warnings and notes for lamp replacement procedures, including cooling and handling.
Details the step-by-step process for safely removing and installing new projector lamps.
Details RS-232 port settings required for projector control via serial interface.
Outlines network control using Telnet and command formats for remote operation.
Explains command formatting, error conditions, and operational limitations for projector control.
Lists common commands with their parameters, min/max values, and default settings.
Details commands for color temperature, contrast, and various edge blending parameters.
Lists commands related to error conditions, fan position, firmware, focus, gamma, and IP settings.
Details commands for lamp status, language selection, and lens adjustments.
Covers commands for noise reduction, overscan, PiP settings, and pincushion correction.
Lists commands for power saving, projection mode, image rotation, and warp adjustments.
Details commands for test patterns, tint, trigger events, keystone, and warp settings.
To Next Page
General
