Setting up the LitePro 580
16 LitePro 580 User’s Guide
Connecting an external sound system
You can use an external public address system or an external self-
amplified speaker system for presentations in large halls or lecture
rooms.
To connect the LitePro 580 to an external sound system, use an audio
cable (3.5mm stereo mini plug), an optional accessory available from
your In Focus dealer.
1. Plug one end of the audio cable into the “Audio Out” port on the
projector.
2. Plug the other end of the cable into the corresponding “Audio In”
jack on the external speaker(s).
3. Use the “Fade” feature on the Audio menu to adjust the audio
output. (See “Fade” on page 29.)
Optional Audio Cable
Amplified
speaker
To Next Page
Loading...
Need help?
General