Infortrend EonStor GS Series Installation Guide

This guide provides the procedure of setting up EonStor GS/GSe/GSe
Pro/GSa and GSc family storage. Hardware and software initial setup will
be step-by-step introduced.
Version: 1.00
Updated: February 2020
EonStor GS Installation Guide

Infortrend EonStor GS Series Specifications

General

Model	EonStor GS Series
RAID Levels	0, 1, 3, 5, 6, 10, 30, 50, 60
Drive Size	2.5-inch, 3.5-inch
Supported Protocols	iSCSI, Fibre Channel
Maximum Capacity	Up to several petabytes (depending on configuration)
Form Factor	Rackmount
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS, Ethernet
Controller Configuration	Dual active-active controllers
Operating System Support	Windows, Linux, VMware, macOS
Interface	SAS, SATA, iSCSI, Fibre Channel, Ethernet
Drive Bays (Number)	12, 24, 60, 80 (depending on model)
Power Supply	Redundant Power Supplies
Cooling	Redundant Fans
Management Interface	Web-based GUI, CLI, SNMP