Infortrend EonStor GS Series - 4-2.2 Create Volume

EonStor CS Installation Guide
page 70 / 97
Installation Guide
4-2.2 Create Volume
In the initialization setup wizard step we created volumes; you can also create additional volumes from
management webpage for different uses.
 If you only need to create the current amount of volumes and it has been successfully created, you
can skip this step.
 If you want to create and additional volume, follow the instructions below on how to create a volume.
1. Go to Settings > Storage > Volumes. Click Add volume to create a new volume.
2. Create a volume.
a. Select a pool for the volume to claim capacity.
b. Select the volume type File-level volume for NAS.
c. Specify a volume name (required).
d. Specify the size of the volume.
e. Click OK to apply the settings.