Infortrend EonStor GS Series - 4-1.2 Create Volume

EonStor CS Installation Guide
page 61 / 97
Installation Guide
4-1.2 Create Volume
In the initialization setup wizard step we created volumes; you can also create additional volumes from
management webpage for providing storage space to multiple host operating systems.
 If you only need to create the current amount of volumes and it has been successfully created, you
can skip this step.
 If you want to create an additional volume, follow the instructions below on how to create a volume.
1. Go to Settings > Storage > Volumes. Click Add volume to create a new volume.
2. Create a volume.
a. Select a pool for the volume to claim capacity.
b. Select the volume type Block-level volume for SAN.
c. Specify a volume name (required).
d. Specify the size of the volume.
e. Click OK to apply the settings.