Infortrend EonStor GS Series - Install Drive on Trays; 1-3.1 3.5 and 2.5 Drive Tray Model (2 U12;2 U24;3 U16;4 U24)

EonStor CS Installation Guide
page 22 / 97
Installation Guide
1-3. Install Drive on Trays
1-3.1 3.5” and 2.5” Drive Tray Model (2U12/2U24/3U16/4U24)
 Press the release button to open the spring handle.
 Orient the hard drive to the tray with the interface connectors facing the open side of the tray and
the label is facing up (A). Secure the drive to the correct holes of the tray using the four bundled
screws (B).
 3.5” SAS / NL-SAS / SATA drive