EasyManua.ls Logo

Infortrend EonStor GS Series - Network Overview

Infortrend EonStor GS Series
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EonStor CS Installation Guide
page 43 / 97
Installation Guide
2-1. Network Overview
There are two types of ports in the GS. Customer can build up different port combination based on the host
board installed on each controller.
There are two types of ports:
Management ports: Administrator manages GS via these ports.
Data ports: Clients access GS data via these ports.
The position of management port based on different models
GSe Pro 100 series: CH3 is the default management port. You may refer to ‘’Detailed front and
back product views’ on official website. (access to link below->image)
https://www.infortrend.com/global/products/families/gsepro/pro100
GSe Pro 200 series: CH3 is the default management port. You may refer to ‘’Detailed front and
back product views’ on official website. (access to link below->image)
https://www.infortrend.com/global/products/families/gsepro/pro200
GSe Pro 1000 series: CH3 is the default management port. You may refer to ‘’Detailed front and
back product views’ on official website. (access to link below->image)
https://www.infortrend.com/global/products/families/gsepro/pro1000

Other manuals for Infortrend EonStor GS Series

Related product manuals