INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 11 AA 68 203 16
35
22
UPS under Redundancy Mode
23
UPS under ECO Mode
24
UPS Fault or Abnormal Warning LED
25
EPO Emergency Power Off
26
Er05 Battery Weak or Dead
27
Er06 Output Short Circuit
28
Er10 Inverter Over-current
29
Er11 UPS Overheat
30
Er12 UPS Output Overloading
31
Er14 Fan error
32
Er15 Wrong Procedure to enter Maintenance Mode
33
Er16 Output Parameters Set Error in Parallel System
34
Er17
ID Numbers are in conflict in Parallel System
or ID number Error in single unit
35
Er21
Parallel communication error ( communication wire disconnected or
failure to find ID1 UPS ) in parallel system
36
Er24 CVCF mode with Bypass input
37
Er27 The UPS must be operated in normal mode in parallel system
38
Er28 Bypass Overload Time out and cut off output.
39
Er31
The settings of both control board and driver board are not matched
each other.
40
Er33 Isolated transformer overheat
41
Er** Other Error code
*The specified modes include Normal mode, ECO mode, CVCF mode, etc..
To Next Page
Loading...
