EasyManua.ls Logo

INFOSEC E6 LCD-RT - 5 Bundled Software Installation Guide; Hardware Installation; Software Installation

INFOSEC E6 LCD-RT
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 11 AA 68 203 16
53
UPS fails to offer
battery backup
or its back up
time is shorter
than its
calculation.
If the backup time is still too short after 8 hours of
charge, please contact your local distributor for
battery replacement.
UPS locks itself
and it can’t be
turned off.
Please refer to chapter 3.5.6 to trouble shoot the
problem; otherwise, consult your local distributor for
help.
5. Bundled Software Installation Guide
5.1.
Hardware Installation
1. Connect the male connector of RS232 cable to the UPS communication port.
2. Connect the female connector of the RS232 cable to a dedicated RS232 port of the
computer.
3. For optional interface cards, you may refer to Chapter 6 for installation.
5.2.
Software Installation
Please refer to the user’s manual of the software for installation.

Table of Contents

Related product manuals