26
5_5_3 Reading Contactless
(Optional)
Bring the card rmly up to the active zone above the
display (at about 1cm). Keep the card close to the display
during the transaction
When a contactless transaction is started the rst (left
hand) status light will be lit steadily; this indicates that the
contactless display is in use but a card is not being read.
hen a contactless card is presented to the contactless active
zone during a transaction the second, third and fourth
status lights will be lit in turn. The card read is successful
when all four status lights are lit and the conrmation tone
is heard.
To Next Page
Loading...
