InHand ISE Series - Ise2008 D

3.2 ISE2008D
Front Panel Layout
1. Power source connection and alarm
connection terminal
2. Dip switch
3. Protective grounding screw
4. Cover plate
5. Power source one indication lamp
6. Optical port FX1 LINK/ACT
indication lamp
7. 100Base-FX single mode/multimode
FC/SC/ST interface FX1
8. 100Base-FX single mode/multimode
FC/SC/ST interface FX2
9. 10/100Base-T(X) RJ45
10. Alarm indication lamp
11. Power source two indication lamp
12. Optical port FX2 LINK/ACT
indication lamp
13. InSwitch model number
14. DIN-rail bracket upper lip
15. Clamp spring
16. DIN-rail bracket attachment screw