Need help?Do you have a question about the InHand InSwitch ISM-P Series and is the answer not in the manual?
General| Product Type | Industrial Ethernet Switch |
|---|---|
| Series | ISM-P Series |
| MAC Address Table | 8K |
| Operating Temperature | -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% (non-condensing) |
| Mounting Type | DIN-Rail Mounting, Wall Mounting |
| Certifications | CE, FCC, RoHS |
Configure HTTP access, port, language, and access mode for web interface.
Configure management interface IP address and related parameters.
Set the port number for accessing the switch via HTTP.
Configure port settings: speed, duplex, flow control.
Control the availability of the HTTP service for web access.
Configure the switch to use HTTP access mode.
Secure web communication by enabling and configuring HTTPS protocol.
Enable HTTPS access mode for secure web connectivity.
Configure the service port number for HTTPS access.
Browser requirements and network setup for web access.
Steps for initial access via the switch's default IP address.
Access the switch using encrypted HTTPS connections.
Manage user accounts, permissions, and access controls.
Configure individual user accounts, permissions, and status.
Manage user groups and assign permissions.
Define and enforce password complexity and validity rules.
Configure access methods: HTTP, HTTPS, SSH, SNMP.
Enhance port security via MAC address management.
Configure 802.1X port-based network access control.
Configure RADIUS server settings for authentication.
Configure settings to prevent Denial of Service (DoS) attacks.
Configure DHCP snooping to prevent rogue DHCP servers.
Configure Access Control Lists (ACLs) for traffic filtering.
Limit broadcast, multicast, unicast storm traffic.
Configure IGMP snooping for efficient multicast traffic.
Configure Virtual Local Area Networks (VLANs).
Configure Virtual Router Redundancy Protocol (VRRP).
VRRP configuration details.
Configure Routing Information Protocol (RIP) for dynamic routing.
Configure Open Shortest Path First (OSPF) routing.
Configure link aggregation for bandwidth and redundancy.
Configure backup link functionality for network resilience.
Configure Spanning Tree Protocol (STP) to prevent loops.
Configure Multiple Spanning Tree Protocol (MSTP).
Configure Ethernet Automatic Protection Switching (EAPS) for ring networks.
EAPS ring configuration details.
Configure Multiple Ethernet Automatic Protection Switching (MEAPS).
Configure Ethernet Ring Protection Switching (ERPS).
System overview and information.
Access reports and logs for monitoring.
Configure Link Layer Discovery Protocol (LLDP) for topology discovery.
Configure the device as a DHCP server.
Configure Sampled Flow (sFlow) for traffic monitoring.
To Next Page