InHand InSwitch ISM-P Series - RIP Router Entries; OSPF Configuration; OSPF Process Configuration

WEB Configuration Manual
- 51 -
8.6.2 RIP Router Entries
Click
Routing -> RIP Configuration
at navigation bar in order, and then click
RIP Router Entries
to enter RIP Router Entries configuration page as following
：
Enter the created RIP process ID, Click
Set
to enter the selected RIP Router Entries page.
Click
Create
to create a new RIP Router Entries of selected RIP process.
8.7 OSPF Configuration
8.7.1 OSPF process
Click
Routing -> OSPF Configuration
at navigation bar in order, and then click
OSPF Process
to
enter configuration page as following:
You should have created a OSPF process firstly, before to do the OSPF Router Entries
configuration otherwise cannot do any editing.
Click
Create
to entry the RIP process creating page
。