InHand InSwitch ISM-P Series - Redundancy; Link Aggregation Configuration; Port Aggregation Configuration

WEB Configuration Manual
- 56 -
Chapter 10 Redundancy
10.1 Link Aggregation Configuration
10.1.1 Port Aggregation Configuration
Click
Redundancy -> Link Aggregation
at navigation bar in order, and then enter the link
aggregation configuration port channel page as following:
Click
Modify
to modify the member port and aggregation mode of the aggregation port.
Click
Create
to create a new aggregation group. As much as 32 aggregation groups can be
configured through Web. Each group can configure at most 8 physical port aggregations.
Click
Delete
to delete the selected aggregation group.