InHand InSwitch ISM-P Series - Cable Diagnosis; Port Mirroring

WEB Configuration Manual
- 69 -
11.3.4 Cable Diagnosis
Click
Diagnostics -> Port -> Cable Diagnosis
at navigation bar in order, and then enter the
configuration page as following
：
You can configure each port of cable diagnosis is enable or disable, and also can configure the
diagnosis period.
Click
Set
to view the results of the diagnosis
。
11.3.5 Port Mirroring
Click
Diagnostics -> Port -> Port Mirroring
at navigation bar in order, and then enter the
configuration page as following:
Click the dropdown box right of the
Mirror Port
and select a port to be the destination port of mirror.
Click the checkbox and select the mirroring source port:
RX The received packets will be mirrored to the destination port
。
TX The transmitted packets will be mirrored to a destination port
。
RX & TX The received and transmitted packets will be mirrored simultaneously
。